3
. INSPECTION/ADJUSTMENT
CLEAN AIR FILTER ELEMENT
Wash the element gently, but throughly in
solvent.
*
Use parts cleaning solvent only. Never
use gasoline or low flash point solvents
which may lead to a
Squeeze the excess solvent out of the
element and let dry.
*
Do not twist or wring out the foam
element. This could damage the foam
material.
Apply the engine oil.
Squeeze out the excess oil.
*
The element should be wet but not
dripping.
More frequent replacement is required when
riding in unusually dusty or rainy areas.
UXV 500
3-6