Alternator Stator Removal/Inspection/ Installation - KYMCO UXV 500i Service Manual

17
. BATTERY/CHARGING SYSTEM
ALTERNATOR STATOR
REMOVAL/INSPECTION/
INSTALLATION
REMOVAL
Drain the engine oil
OIL" section in the chapter 3).
Disconnect the alternator stator connectors.
Remove the starter pulley (refer to the
"STARTER PULLEY
REMOVAL/INSPECTION/INSTALLATI
ON" section in the chapter 19).
Remove the oil filler plug.
Remove the fourteen bolts and then remove
the right crankcase cover.
17-11
.(refer to the "ENGINE
Alternator Stator Connectors
Oil Filler Plug
Right Crankcase Cover
UXV 500