Service Information - KYMCO UXV 500i Service Manual

Hide thumbs Also See for UXV 500i:

Table of Contents

. STARTER SYSTEM

SERVICE INFORMATION

• Always turn the ignition switch to "OFF" before servicing the starter motor. The motor could

suddenly start, causing serious injury.

• The starter motor can be serviced with the engine in the frame.

• When checking the starter system, always follow the steps in the troubleshooting flow chart

(page 19-2).

• A weak battery may be unable to turn the starter motor quickly enough, or supply adequate

ignition current.

• If the current is kept flowing through the starter motor to turn it while the engine is not cranking

over, the starter motor may be damaged.

• See section 20 for following components:

™ Ignition switch

™ Starter switch

™ Brake light switch

SPECIAL TOOL

Flywheel puller

Starter pulley nut

5.5 kgf-m (55 N-m, 40 lbf-ft)

Table of Contents