KYMCO UXV 500i Service Manual page 301

Hide thumbs Also See for UXV 500i:

Table of Contents

REAR WHEEL/SHOCK

ABSORBER/SWING ARM

STEERING KNUCKLE

DISASSEMBLY/ASSEMBLY

Remove the dust seals.

nspect the inner race play of the bearing by

hand while it is in the steering knuckle.

Rotate the inner race by hand to inspect for

abnormal noise and smooth rotation.

If there is anything unusual, replace the

bearing with a new one.

Make sure to check bearing in the same

Remove the bearings using the appropriate

bar, then remove the spacer.

Chapters

Table of Contents