11
.FINAL REDUCTION/
TRANSMISSION SYSTEM
UPPER SHIFT FORK
DISASSEMBLY/ASSEMBLY
DISASSEMBLY
Remove the upper shift fork (refer to the
"TRANSMISSION
REMOVAL/INSPECTION/
INSTALLATION" section in this chapter)
Remove the snap ring, washer and fork.
Remove the spring, cam pawl and washer.
ASSEMBLY
Install the washer and cam pawl.
*
Align the mark on the cam pawl with the
mark on the shaft.
Install the spring.
Install the fork.
*
Align the mark on the fork with the mark
on the shaft.
Install the washer and snap ring.
11-25
Snap Ring/Washer
Fork
Washer
Cam Pawl
Washer
UXV 500
Spring
Cam Pawl
Shaft
Fork