KYMCO UXV 500i Service Manual page 189

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
Install the drive pulley assembly.
Install the washer and nut.
＊
Make sure the "OUT SIDE" marks on
the washer faces the left crankcase cover.
Use the special tool to hold drive pulley,
then tighten the nut to the specified torque.
Torque: 14 kgf-m (140 N-m, 100.8 lbf-ft)
Special tool:
Drive pulley holder
Apply oil to the threads
A120E00058
Drive Pulley Holder
Drive Pulley Nut/Washer
UXV 500
10-8