Rear Wheel Hub Removal/Inspection; Installation - KYMCO UXV 500i Service Manual

15.
REAR WHEEL/SHOCK
ABSORBER/SWING ARM
REAR WHEEL HUB
REMOVAL/INSPECTION/

INSTALLATION

REMOVAL
Place the machine on a level place.
Remove the rear wheel .
Elevate the rear wheels by placing a suitable
stand under the frame.
＊
Support the machine securely so there is
no danger of it falling over.
Remove the cotter pin.
Apply the rear brake and then remove nut
and rear wheel hub.
INSPECTION
Check the wheel hub for cracks or deamage.
Check the wheel hub splines for wear or
damage.
Cotter Pin
Apply grease
UXV 500
Nut/Washer
15-4