PREVENTION
LIGHTS AND ELECTRIC
Turn your UXV450's low-beam on and off to make sure they work. At
the same time, check that the taillight and brake lights work. Also,
check the status/warning indicators (reverse, neutral, and lo beam)
on the dash when you start the vehicle. Check the ignition switch
operation. Do not drive your UXV450i unless all the systems are
working properly.
Check:
1. Headlight low-beam
2. Taillight/brake
3. Light Status/warning indicators
Check:
1. Ignition switch
OIL AND FUEL
Start with a full tank of gas before every drive, and make sure the oil
is at the proper level. Don't forget to check for fluid leaks around the
vehicle. Watch the engine temperature indicator on the dash to
ensure the engine coolant level is adequate.
Check:
1.Gas
2. Oil
3. Fluid leaks
30
CHASSIS
Grass, leaves and other debris can get entangled in your Side-by-
Side vehicle's suspension and shocks. Keep the suspension arms,
shock springs, and fenders clean and free of debris. Check the
steering smoothness by rotating the steering wheel full-left and full-
right. Make sure there is no binding, restrictions, free-play, or
looseness in the steering components.
Check:
1. Suspension arms
2. Shock springs
3. Steering
MISCELLANEOUS ITEMS
Inspect your UXV450i's air filter. Look for debris or damage that may
indicate you need to replace it, as a clogged filter can prevent your
engine from running. Check the battery terminals for tight- ness and
corrosion. Also, be sure to tighten any loose parts, nuts, or bolts on
the chassis.
Check:
1. Air filter
2. Battery
3. Tighten chassis fasteners, any loose parts