KYMCO UXV 500i Service Manual page 192

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
Check the dust seals on the movable drive
face for wear or damage.
ASSEMBLY
Clean the movable drive face, drive pulley
face, weight rollers, slide pieces, ramp plate
and drive face boss.
＊
Remove any excess grease.
Install the weight rollers.
＊
The direction of all weight rollers is the
same. The thin side is towards to
counterclockwise.
10-11
Dust Seals
Movable Drive Face
Drive Pulley Face
UXV 500
Drive Face Boss
Weight