KYMCO UXV 500i Service Manual page 196

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
ASSEMBLY
Clean any oil from the drive belt sliding
surfaces on the driven face.
Apply grease to lips of the new dust seals
and install into the movable driven face.
Coat new O-rings with grease and install
them into the movable driven face grooves.
Install the movable driven face onto the
driven face.
Install the guide rollers and guide roller
pins.
Filling 8 g of grease to each guide groove.
Install the guide pins/rollers.
10-15
Dust Seal Dust Seal
O-ring O-ring
Grease
Grease
Guide Pins/Rollers
UXV 500