KYMCO UXV 500i Service Manual page 215

11
.FINAL REDUCTION/
UXV 500
TRANSMISSION SYSTEM
Inspect the rear middle joint splines for wear
or damage.
Inspect the output shaft splines for wear or
damage.
Secondary Drive Bevel Gear/Shim
INSTALLATION
Install the shim and secondary drive bevel
gear.
Holder the driven pulley by using the special
tool, then install and tighten the nut to the
specified torque.
Torque:
14 kgf-m (140 N-m, 100.8 lbf-ft) Apply oil
Special tool:
Y-type holder A120E00056
Stake the nut with a center punch.
11-6