KYMCO UXV 500i Service Manual page 254

Hide thumbs Also See for UXV 500i:

Table of Contents

. DRIVE TRAIN

Inspect the front cvj assy spline for wear or

If any damages are found, replace them with

Inspect the front cvj assy for bends.

If any damages are found, replace them with

Do not attempt to straighten a bent shaft;

this may dangerously weaken the shaft.

Case Side Joint

● Wash all parts (except for the boots) before assembly,

clean the inside and outside of the boot with a cloth.

● Do not wash the boots in any commercially available

degreaser, such as gasoline or kerosene. Washing in a

degreaser causes deterioration of the boot.

Front Drive Shaft

Chapters

Table of Contents