14.
FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
ASSEMBLY
Apply lightweight lithium-soap base grease
to the new bearings of the steering knuckle
and lips of the new dust seal before install
them.
Install the new inner bearing by using the
special tool.
Special tool:
Oil seal and bearing driver
Install the spacer into the steering knuckle.
*
Make sure the long side of the spacer
faces the outer bearing
Install the new outer bearing by using the
special tool.
Special tool:
Oil seal and bearing driver
Install the new dust seals by using the
special tool.
Special tool:
Oil seal and bearing driver
A120E00014
A120E00014
A120E00014
Bearing Driver
Bearing Driver
Dust Seal
UXV 500
Spacer
14-14