20. LIGHTS/SWITCHES
UXU 500
Headlight Connector
BULBS REMOVAL
HEADLIGHT
Remove the rubber boot .
Disconnect the headlight wire connector.
from the headlight case.
Lock Clip
Relax the lock clip to remove the bulb and
replace with a new one.
Install the bulb, aligning the bulb socket
groove with the bulb tab and set the lock
clip.
Connect headlight wire connector.
Install the rubber boot.
Install the front fender in the reverse order
of removal.
Bulb
POSITION LIGHT
Remove the bulb socket by pulling it out.
Remove the bulb.
Install the bulb in the reverse order of
removal
20-2