KYMCO UXV 500i Service Manual page 67

Hide thumbs Also See for UXV 500i:

Table of Contents

. INSPECTION/ADJUSTMENT

3. Loosen the lock nut and adjuster on the

4. Turn the adjuster until the caliper lever is

about to rotate then Tighten the lock nut.

Parking brake cable end length:

L: 53 ± 2 mm (2.12 ± 0.08 in)

5. Slowly turn the adjusting bolt on the

caliper clockwise until resistance is felt,

then turn adjusting bolt 1/8

counterclockwise.

6. Tighten the lock nut to the specified

torque while hold the adjusting bolt.

1.6 kgf-m (16 N-m, 11.52 lbf-ft)

Chapters

Table of Contents