KYMCO UXV 500i Service Manual page 197

Hide thumbs Also See for UXV 500i:

Table of Contents

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH

Install spring collar.

Use the special tool to install spring and

spring seat, then install and tighten the nut

to the specified torque.

Torque: 7.5 kgf-m (75 N-m, 54 lbf-ft)

Special tool:

Driven pulley spring compressor

● Attach the block, nut, nut wrench and

spring compressor to the driven pulley

● Place the block in a vise and secure it.

● Tighten the spring compressor nut and

compress the spring.

● Install the nut and tighten it to the

specified torque with the nut wrench.

● Remove the spring compressor and nut

Spring Compressor

Compressor Nut

Chapters

Table of Contents