Clutch Disassembly/Inspection/Assembly - KYMCO UXV 500i Service Manual

10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
CLUTCH
DISASSEMBLY/INSPECTION/
ASSEMBLY
DISASSEMBLY
Remove the clutch housing and clutch
carrier assembly (refer to the "CLUTCH
REMOVAL/INSTALLATION" section in
this chapter).
Remove the one-way clutch bearing from
the clutch housing.
Clutch housing removal (not USA type):
Remove the oil seal.
Remove the snap ring, then remove the
clutch housing.
Remove the snap ring, then remove the
bearing.
10-21
One-way Clutch Bearing
Oil Seal
Snap Ring
Snap Ring
UXV 500
Bearing