18
. IGNITION SYSTEM
UXV 500
IGNITION PULSE GENERATOR
INSPECTION
Disconnect the ignition pulse generator
connector.
Measure the ignition pulse generator resistance
between the Green/White wire and Blue/Yellow
wire.
Standard: 489±20% Ω (20ºC/68ºF)
Ignition Pulse Generator Connector
IGNITION COIL
REMOVAL/INSTALLATION
Disconnect the spark plug cap from the spark
plug
.(page 18-4).
Disconnect the ignition coil primary connectors.
Remove the two bolts and the ignition coil.
Installation is in the reverse order of removal.
Ignition Coil
CDI
CDI
REMOVAL/INSTALLATION
Remove the under
hood.refer to the "FRAME
COVERS" section in the chapter 2).
Disconnect the CDI connectors and remove
the CDI.
18-6