10. DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
INSTALLATION
Apply clean engine oil to the clutch carrier
assembly and collar, then install the collar
and clutch carrier assembly.
Install the washer
Use the special tools to install and tighten
the nut to the specified torque.
Torque: 14 kgf-m (140 N-m, 100.8 lbf-ft)
Special tool:
Y-type holder
Stake the nut with a center punch.
10-19
A120E00056
Collar
Clutch Carrier Assembly
UXV 500
Nut