KYMCO UXV 500i Service Manual page 275

14.
FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• Jack the machine front wheel off the ground and be careful to prevent the machine from falling
down.
• During servicing, keep oil or grease off the brake disk
• Inspect the brake system before riding.
SPECIFICATIONS
Front wheel rim run out
Tie rod length
Rod-end (tie rod) angle
TORQUE VALUES
Front swing arm nut
Front wheel nut
Front wheel hub nut
Knuckle ball joint nut
Tie-rod ball joint nut
Tie-rod adjusting nut
Front shock absorber mount bolt
Handlebar holder bolt
Steering bracket
SPECIAL TOOLS
Oil seal and bearing driver
Item
Radial
Axial
4.8 kgf-m (48N-m, 34.8lbf-ft)
5.5 kgf-m (55 N-m, 40 lbf-ft)
20kgf-m (200 N-m, 145 lbf-ft) Castle nut
3 kgf-m (30 N-m, 22 lbf-ft)
3.5 kgf-m (35 N-m, 25.5lbf-ft) Castle nut
4.0 kgf-m (40 N-m, 29 lbf-ft)
4 .5kgf-m (45 N-m, 32 lbf-ft)
2.5 kgf-m (25 N-m, 18 lbf-ft)
2.2 kgf-m (22 N-m, 16 lbf-ft)
A120E00014
Standard
⎯
⎯
379.75±0.25 (15.19±0.01)
180 º
Unit: mm (in)
Service Limit
2 (0.08)
2 (0.08)
⎯
⎯
Castle nut
UXV 500
14-2