Storage System Monitoring; Checking Led Status; Displaying Status Via Eternus Web Gui; Figure 39 Eternus Web Gui Screen - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

3.

Storage System Monitoring

This chapter describes the status monitoring of the ETERNUS AF.

Checking LED Status

The status of the ETERNUS AF can be checked by the LEDs.
If the FAULT LED in the operation panel is amber, contact your maintenance engineer.

Displaying Status via ETERNUS Web GUI

The status of the ETERNUS AF and the usage status of RAID groups, TPPs, and SDPs can be checked in the Over-
view screen of ETERNUS Web GUI.

Figure 39 ETERNUS Web GUI Screen

Table 11 shows the general status.
Status of the ETERNUS AF is monitored periodically, and the result is displayed as a general status icon with
character strings.

Table 11 General Status of ETERNUS Web GUI

Status
(green)
(red)
(red)
Description
The ETERNUS AF is in a normal state.
An abnormality is detected at a power-off, and I/O access from the server
cannot be received.
The ETERNUS AF is in error state.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
41
P3AG-1842-06ENZ0