Connecting The Wireless Network Adapter - GE Voluson P6 Service Manual

GE H RAFT
EALTHCARE
DIRECTION 5459672-100, R
3-5-5

Connecting the Wireless Network Adapter

The Wireless Network Adapter can be connected to any accessible USB port of the Voluson® P8 /
Voluson® P6.
NOTE: Connection of the WLAN Adapter is always the same.
Figure 3-9 Connection Scheme - Wireless (USB) Network Adapter
1.) Turn ON the power of the system and wait till the system has booted.
2.) Plug the Wireless Network adapter into an accessible USB port of the Voluson® P8 / Voluson® P6.
All software drivers are pre-installed for the designated Wireless Network adapter only.
NOTE: After physical connection of the WLAN adapter to the Voluson® P8 / Voluson® P6 system, follow the
procedure described in
3-18
6 DRAFT (J
EVISION
Section 3-11-2 "Wireless Network Configuration" on page
Section 3-5 - Connection of Auxiliary Devices
17, 2013)
ANUARY
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
3-67.
® P6
ANUAL