Back End Processor Tests - GE Vivid i n Service Manual

GE H
EALTHCARE
D FQ091013, R
IRECTION
4-3-4

Back End Processor Tests

4-3-4-1 Magneto Optical Drive (MOD) Test
Table 4-23
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
4-34
1
EVISION
MOD Test - Recommended
Task
Restart the system performing a full shutdown and
bootup, as described in Power ON/Boot-up on page
Insert a new MO Media Sony EDM-2300B (2.3G) into
the MOD.
Press Ctrl+F11 (or Alt+D) on the keyboard and select
<Back End>, <Media Driver> and <MO>, as appropriate.
Select the IsMediaAcces button.
Select the EjectMO button.
Select the LoadMO button.
Select the Format button.
Select the GetVolInfo button.
Select the Get BTPsector button.
Select the SetVolLabel1 button.
Select the GetVolInfo button.
Select the Exit button and close the Diagnostic
Application.
Press the Archive button on the keyboard.
Press the Utilities button on the soft menu.
Press the Removable Media Utility button.
Type the new label (for example, "Side1"), then select
the Format button.
Confirm "YES" to the warning message.
Select the Eject button.
Select the OK button to exit the utility.
Section 4-3 - Functional Checks
V
IVID I N AND
Expected Result(s)
During the boot-up process, verify that the messages
SCSI Adaptor Installation 2271149-2INS and MO are
4-3.
displayed.
The UtilMediaApp dialog box is displayed.
The message Media in drive G is accessible is
displayed.
The message Media is outside is displayed. Check
that the media has actually been ejected.
The message Media is inside is displayed. Check that
the media is actually inside.
The message Media in drive G was formatted
successfully is displayed.
The message Media in drive G has following
properties: Media Label = MY_LABEL,
Media File-System Name = FAT is displayed.
The message The Bytes Per Sector value of media
in drive G is 512 is displayed.
The message Media Label set to TEST_LABEL1 is
displayed.
The message Media in drive G has following
properties: Media Label = TEST_LABEL,
Media File-System Name = FAT is displayed.
The Patient List window is displayed.
The General Status window is displayed.
The Utility window is displayed, showing the message:
Free space on Media: 1096 MB.
The message Current Media Name is:SIDE1. Media
was formatted successfully is displayed.
MO Label: SIDE1, MO STATUS: MOUNTED
The message Media Ejected is displayed.
MO STATUS: Ejected.
V N S M
IVID Q ERVICE ANUAL