GE Vivid i n Service Manual page 562

GE H
EALTHCARE
D FQ091013, R
IRECTION
Figure 8-39
6) Disconnect each of the two HVPS cables from their sockets on DC Power Supply, as shown in
Figure 8-40
7) Gently lift one side of the P&M Board upwards and hinge it open to gain access to the RFI and TR32
Board assembly beneath, as shown in
(The RFI and TR32 Boards are seated together in the system as one unit).
8-34
1
EVISION
below.
Figure 8-39 Disconnecting the PCI Cable from the RFI Board
below.
Figure 8-40 Disconnecting the DC Power Supply
Figure 8-41 Accessing the RFI and TR32 Boards
Section 8-3 - Internal Component Replacement Procedures
V
IVID I N AND
Figure 8-42 below.
V N S M
IVID Q ERVICE ANUAL