Table of Contents
Advertisement
GE H
EALTHCARE
D
FQ091013, R
IRECTION
9.) Verify that a single clear QRS signal is displayed on the screen, as shown in
10.)When done, trackball to the Exit button and press Set.
11.)When prompted by the following message, select Yes or No as applicable:
12) Proceed as follows:
•
13.)Press the <Esc> button on the keyboard to close the Diagnostic Test Window.
7-114
1
EVISION
If the test passed but the original problem persists, contact your local On-Line Center for
assistance.
Section 7-6 - Performing Back End Diagnostics on the System
V
V
N S
IVID I N AND
IVID Q
Figure
M
ERVICE
ANUAL
7-79.
Advertisement
Table of Contents
