GE Vivid i n Service Manual page 654

Hide thumbs Also See for Vivid i n:
Table of Contents

Advertisement

GE H
EALTHCARE
D
FQ091013, R
IRECTION
15) Type the Label as: SYSTEM
16) Type the size required. This should be at least 3GB (up to 4GB).
17) Activate the Beginning of Unallocated checkbox.
18) When done, click OK.
The System partition and allocated space is now listed in the Partition Magic Screen.
19) With the System partition selected (highlighted), select the Advanced Tool under the Operations
menu.
20) In the dialog box displayed, click Set Active, then click OK.
21) When the message "Are you sure you want to change the active partition?" is displayed, click OK.
22) With Unallocated selected in the Partition Magic Screen, repeat
next partition, using the following:
Partition: Logical Partition
Partition Type: NTFS
23) Type the Label as: USER
24) Type the size required. This should be at least 5GB (up to 6GB).
25) Activate the Next Unallocated checkbox.
26) When done, click OK.
The User partition and allocated space is now listed in the Partition Magic Screen.
27) With Unallocated selected in the Partition Magic Screen, repeat
next partition, using the following:
Partition: Logical Partition
Partition Type: NTFS
28) Type the Label as: SWAP
29) Type the size required. This should be 1/2 to 1GB - for example, 1022.6.
30) Activate the End of Unallocated check box, then click OK.
The Swap partition and allocated space is now listed in the Partition Magic Screen.
31) With Unallocated selected in the Partition Magic Screen, repeat
next partition, using the following:
Partition: Logical Partition
Partition Type: NTFS
32) Type the Label as: ARCHIVE
Note:
The Archive size will be any remaining space (for example, 14,456.9), therefore do not type
over the value displayed.
The Archive partition and allocated space is now listed in the Partition Magic Screen.
33) Click the Apply button at the lower right of the screen.
The Batch progress menu is displayed.
34) When the message "All operations complete" is displayed, click OK.
35) Click Exit.
8-126
1
EVISION
Section 8-5 - Software Loading
V
V
N S
IVID I N AND
IVID Q
step 15
and
step 16
step 15
and
step 16
step 15
and
step 16
M
ERVICE
ANUAL
to create the
to create the
to create the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vivid q nFl000110Fl000090Fq000001Vivid-iVivid-q

Table of Contents