GE Vivid i n Service Manual page 202

GE H
EALTHCARE
D FQ091013, R
IRECTION
10.)Trackball to the Remote Path field and type in the IP address and path of the remote computer:
\\10.0.0.2\EVUE_IMPORT, or type in the remote computer full name \\Name\EVUE_IMPORT
(refer to
11.)Trackball to the Destination field, open the drop-down menu and select Remote Path
(\\10.0.0.2\EVUE_IMPORT), or the computer name \\Name\EVUE_IMPORT
(refer to
12.)Activate the Copy Media Player Installation check box.
Note:
Step 12
Windows XP. After initial transfer of eVue, it is recommended to disable this check box.
The Vivid i n/ Vivid q N dataflow is set and ready for export/import of eVue files into a network
computer.
From now on, whenever the Vivid i n/ Vivid q N is used for scanning and the Store button is pressed,
another person will be able to view the stored loop on the remote e-Vue PC (after a short
transmission time).
When new loops arrive, the following message will be displayed at the bottom of the screen:
"New images have arrived - To view please refresh the screen using F5"."
3-10-8-4 Using eVue
1.) On the Vivid i/Vivid q N portable ultrasound scanner, in regular scanning mode, press Patient.
When the following window is displayed, select Create New Patient.
3-134
1
EVISION
Figure 3-141).
Figure 3-141).
is recommended for the first transfer of eVue files. This step is not needed for
Section 3-10 - Connectivity Setup
V V N S
IVID I N AND IVID Q
M
ERVICE ANUAL