GE Vivid i n Service Manual page 112

GE H
EALTHCARE
D FQ091013, R
IRECTION
3-7-2-5 External USB Hard Disk
IMPORTANT Do not connect the External USB Hard Disk to the Vivid i n/ Vivid q N system while
NOTICE
scanning is in progress! This will avoid the risk of causing image artifacts.
IMPORTANT During Stand-by mode, it is NOT recommended to introduce or remove USB
NOTICE
devices; this may cause the system to lock-up during the boot-up procedure.
The External USB Hard Disk can be connected to any of the USB ports on the SafeLock Cart.
One must use the additional power source (supplied with the External USB Hard Disk) to activate the
External USB Hard Disk.
WARNING Do not attempt to use a different type of mass storage device other than the
External USB Hard Disk supplied with the system. The ultrasound system is an extremely
sensitive and complex medical system. Any unauthorized peripherals may cause system failure
or damage!
Refer to the External USB Hard Disk Installation Procedure section, page 8-151 for instructions on initial
configuration and connecting the External USB Hard Disk to the Vivid i n/Vivid q N portable ultrasound
scanner.
3-44
1
EVISION
Figure 3-39 External USB Hard Disk
Section 3-7 - Completing the Hardware Installation
V V N S
IVID I N AND IVID Q
M
ERVICE ANUAL