GE Vivid i n Service Manual page 520

GE H
EALTHCARE
D FQ091013, R
IRECTION
7-8-2-1 Formatting a DVD/CD
Prior to exporting logs or any data onto a DVD/CD, the media must be formatted, as described below.
To Format a DVD/CD:
1.) Connect the DVD/CD-RW media drive to the USB port and make sure the DVD/CD-RW power
switch on the rear of the drive is set in the External position, as shown in
2.) Insert the blank DVD/CD media into the DVD/CD-RW drive tray.
IMPORTANT: Use only CD-R, DVD-R or DVD+R media from a reputable vendor and only
NOTICE
high-grade media types.
3.) On the Vivid i n/ Vivid q N system, press the <Config> key.
4.) Select the Connectivity Tab and activate the Tools Tab.
5.) Under Removable Media, select the media type CD/DVD Writeable from the Media drop-down
menu, as shown in
6.) Click the Format button.
7-168
1
EVISION
Internal
Figure 7-145 Power Switch in External Position
Figure 7-146.
Figure 7-146 Connectivity - Tools - Removable Media
Section 7-8 - Automatic Error Log
V
IVID I N AND
Power OFF
V N S M
IVID Q ERVICE ANUAL
Figure 7-145, below.
External