Table of Contents
Advertisement
GE H
EALTHCARE
D
FQ091013, R
IRECTION
Section 8-6
Performing a Complete System Back-up
IMPORTANT: Contact the customer and request that a full incremental back-up be performed prior to
NOTICE
upgrade. If necessary, refer them to the Vivid i n/Vivid q N User Manual. Ask for removal (delete) of
un-necessary patient information, so that the back-up process will require minimal time.
Remind customers that GE Medical Systems strongly recommends that periodic back-ups of their
Archive be performed. This routine back-up process will assure the retention of all the information that
is temporarily saved into the local Archive (hard-disk). The permanent Archive is the backed-up Archive
on the variety of medias.
Do not proceed with the upgrade process if a complete incremental back-up process has not
been performed. Contact the On-Line Center to resolve any back-up process issues, before
proceeding with the upgrade. Ignore this note if back-up of patient information is not required, as per
the customer's instructions.
8-6-1
Database Merge
The Database Merge process can be implemented by using the Import/Export functions of the
Vivid i n/ Vivid q N system, as described in the procedure below.
8-6-1-1
Preparation
1.) If not already connected, connect the DVD\CD-RW to the USB port at the rear of the system and
connect power to the DVD\CD-RW drive.
2.) Press the <Eject> button of the DVD\CD-RW drive to verify that no disc is present in the disk drive.
8-6-1-2
Database Merge Procedure
8-6-1-2-1
Logging on to the System
1.) Bootup the system using the service dongle.
The Maintenance Access dialog box opens.
2.) Enter the current applicable service password. Click OK.
3.) In the Start Application screen that is displayed, click Start.
The system opens at the default scanner screen.
NOTE:
You can access the scanner default screen from the Windows Desktop as follows:
1.) Click the Windows Start button at the bottom left corner of your screen and select Run from the
scroll-down menu.
2.) At the command prompt, type "Echoloader /service" and click OK.
The default scanning screen opens.
8-6-1-2-2
Running Disk Management
NOTE:
See Disk Management in the Vivid i n or Vivid q N User's Manual on your document CD.
1.) Insert media (e.g. CD/DVD) or connect to a network repository.
2.) From the keyboard, press the Config button.
The Operator Logon screen opens - see
1
EVISION
Chapter 8 - Replacement Procedures
V
IVID I N AND
Figure
8-135.
V
N S
M
IVID Q
ERVICE
ANUAL
8-141
Advertisement
Table of Contents
