Table of Contents
Advertisement
GE H
EALTHCARE
D
FQ091013, R
IRECTION
Figure 7-115 Diagnostics Page Overview showing DC Offset Calibration Diagnostic in Right Pane
As shown in
•
Instructions
The Instructions refer to a test-specific HTML page, or the default instructions HTML page.
•
Status
The "Status" section is the last-known status for the particular diagnostic. When a new diagnostic
test is performed, the section displays the latest status of all test results.
•
Control
Control enables you to control the diagnostics and provide feedback. The background color of the
Control frame is initially grey. Upon completion of a diagnostic, the background color changes to
indicate the updated status - either Red (Fail), Green (Pass) or Grey (Abort).
-
-
-
-
1
EVISION
Figure
7-115, the right pane is divided into three parts, explained below:
Loop Count Field: Enables you to enter the number of times that the diagnostic test should
be performed. Any numeric value between one and four digits can be entered. This field is
queried after you press Execute to start a diagnostic test.
Execute Button: Enables you to start a selected diagnostic test. Once the diagnostic is
running, the Execute button becomes the Abort button, enabling you to stop the diagnostic.
Text Field: Displays a short starting or aborting message, as well the diagnostic completion
status.
Progress Indicator: Displays the test progress.
Chapter 7 - Diagnostics/Troubleshooting
V
V
N S
IVID I N AND
IVID Q
M
ERVICE
ANUAL
Instructions
Status
Control
7-145
Advertisement
Table of Contents
