GE Vivid i n Service Manual page 556

Hide thumbs Also See for Vivid i n:

Table of Contents

securing clips on all four sides, using both hands to release and lift it away from the LCD display.

LCD Display Frame Installation Procedure

When performing the following installation procedure steps, it may be helpful to review the appropriate

movie clips previously referenced in the

1) With the LCD Display in the fully open position, return the LCD display frame to the correct position

and using both hands, press the frame under the securing clips on all four sides to fasten it against

the LCD display. Refer to

2) Return and tighten the four screws (previously removed).

3) With the LCD Display in the open (upright) position, return the screw cap to each of the

four screws that fasten the LCD frame in position, as shown in

4.) Proceed to perform the following functionality tests:

Figure 8-32 Removing the LCD Display Frame

Figure 8-32 on page

SafeLock Cart - Grounding Continuity on page 10 - 23

is currently mounted on the SafeLock cart

SafeLock Cart - Chassis Current Leakage Test on page 10 - 25

Section 8-2 - External Component Replacement Procedures

IVID I N AND

LCD Display Frame Removal

Figure 8-30 on page

- only if the Vivid i n/ Vivid q N system