Networking Pre-Installation Requirements - GE Vivid i n Service Manual

GE H
EALTHCARE
D FQ091013, R
IRECTION
2-3-4

Networking Pre-Installation Requirements

2-3-4-1 Stand-alone Unit (without Network Connection)
None.
2-3-4-2 Unit Connected to Hospital's Network
Supported networks:
• Wired LAN
• Wireless LAN
2-3-4-3 Purpose of the DICOM Network Function
DICOM services provide the operator with clinically useful features for moving images and patient
information over a hospital network. Examples of DICOM services include the transfer of images to
workstations for viewing or transferring images to remote printers. As an added benefit, transferring
images in this manner frees up the on-board monitor and peripherals, enabling viewing to be done while
scanning continues. With DICOM, images can be archived, stored, and retrieved faster, easier, and at
a lower cost.
2-3-4-4 DICOM Option Pre-Installation Requirements
To configure the Vivid i n/ Vivid q N ultrasound unit to work with other network connections, the network
administrator must provide the required information, which should include the following:
• Vivid i n/ Vivid q N Details:
• Routing Information:
• DICOM Application Information:
1
EVISION
Chapter 2 - Site Preparations
V
DICOM network details for the Vivid i n/ Vivid q N unit, including
the host name, local port, IP address, AE title and net mask.
IP addresses for the default gateway and other routers in use at
the site.
Details of the DICOM devices in use at the site, including the
DICOM host name, AE title and IP addresses.
V N S
IVID I N AND IVID Q ERVICE
M
ANUAL
2-9