GE Vivid i n Service Manual page 679

GE H
EALTHCARE
D FQ091013, R
IRECTION
Power IN Cable
WARNING: In the event that the AC/DC Power Converter and Cables have been supplied with the
Power IN Cable Part # 066E0661 (color white), discard this cable and DO NOT USE.
Order the correct Power IN Cable Part # 5400905 (color black).
8-7-2-5 External USB Hard Disk Installation Procedure
1) Connect the USB 2.0 cable to the USB 2.0 socket at the rear of the disk unit.
2) Connect the cable from the power supply to the power connector on the rear of the disk unit.
3) Verify that the volume configuration is set to RAID 1
The External USB Hard Disk is configured as a mirrored volume (RAID 1).
This ensures optimal data integrity and immediate access to the data, even if one disk fails.
4.) Verify that both MODE switches are set to the ON position as illustrated
NOTE: The total RAID 1 capacity is half the physical capacity of the two drives.
1
EVISION
External USB Hard Disk - Rear View
AC/DC Power Converter and Cables
Figure 8-151 External USB Hard Disk - Rear View and Cables
Chapter 8 - Replacement Procedures
V V N S
IVID I N AND IVID Q
Power OUT Cable
M
ERVICE ANUAL
8-151