GE Vivid i n Service Manual page 358

GE H
EALTHCARE
D FQ091013, R
IRECTION
7-2-3-1 View Log
From the Diagnostics Test Window
information described below. This is shown in the View Log dialog box (see example in
Figure 7-3
area)
.
Table 7-3
Option
File
Date
Time
Log File Scroll
Bar and Arrows
Tests
Result
Loop
Date
Tests Scroll
Bar and Arrows
Loops Scroll
Bar and Arrows
7-6
1
EVISION
below) which is displayed in the upper right portion of the screen (over the Data Flow Map
Vivid i n/ Vivid q N Diagnostics Test Window - View Log
Log file number
Date test was performed.
Time test was executed.
Enables scrolling through the list of Log Files
Displays test sequence log files. Shows a list of
the specific diagnostic test/s included in the
currently-selected test sequence.
Lists test results as either PASS or FAIL.
Lists name of loop and the sub-tests within the
loop
Date test was performed.
Enables scrolling through the list of Test Log
Files.
Enables scrolling through the Loops and sub-
tests.
Section 7-2 - Diagnostics
(Figure 7-1) the View Log button provides access to the test result
Description
V V N S
IVID I N AND IVID Q
Comments
A test sequence may have up to four
reports. Since only one specific test may
have failed, the scroll arrows enable
jumping directly from one Failed test to the
next (i.e., failures only).
Alternatively, you can scroll through all the
tests (one-by-one).
Jump to Failed Tests
A test may have many loops, each of
which may have sub-tests. Since only one
specific sub-test may have failed, the
scroll arrows enable jumping directly from
one Failed sub-test to the next (i.e.,
failures only). Alternatively, you can scroll
through all the loops (one-by-one).
Jump to Failed Sub-tests
M
ERVICE ANUAL
Scroll between
tests here
Scroll between
loops here