Back End Processor Checks; Operator Panel Test; Peripheral Checks; Turn Off Power To Vivid T8/Vivid T8 Pro - GE Vivid T8 Basic Service Manual

General Procedures and Functional Checks

4-3-30 Back End Processor checks

4-3-31 Operator Panel Test

4-3-32 Peripheral checks

4-3-32-1 Printer checks

4-3-33 Turn OFF Power to Vivid T8/Vivid T8 Pro

4-3-34 Mechanical Functions Checks

4-3-34-1 Operator Panel Movement
4-34
• If all the previous tests have been passed successfully, the
Back End Processor is most likely OK.
If the system seems to be operating erratically, please refer
to 'Diagnostics/Troubleshooting' on page
• The Operator Panel is tested when the is powered up as
part of the start-up scripts, run at every start-up.
For more info, please refer to
on page 7-1.
The internal printer is controlled from the P1 and P2 keys on the
Vivid T8/Vivid T8 Pro's Operator Panel.
The factory default is:
• P1 for the UP-D711MD printer
P2 for the whole screen secondary capture to clipboard
See 4-2-3 'Power off' on page 4-8 for more information.
Please refer to:
• 4-2-4 'LCD Monitor position adjustment' on page 4-9
Vivid T8/Vivid T8 Pro – Basic Service Manual
7-1.
'Diagnostics/Troubleshooting'
5718826-100 English Rev. 10