Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration
l
l
Data Preparation
To configure a console interface, you need the following data.
No.
1
2
3
4
5.3.2 Configuring Console Interface Attributes
You can configure the rate, flow control mode, parity mode, stop bit, and data bit for the console
port.
Context
Do as follows on the switch that the user logs in to:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface console interface-number
The console user interface view is displayed.
Step 3 (Optional) Run:
speed speed-value
The baud rate is set.
By default, the baud rate is 9600 bit/s.
Step 4 (Optional) Run:
flow-control { hardware | none | software }
Issue 01 (2011-07-15)
Powering on the switch
Connecting a PC to the switch
Data
Baud rate, flow-control mode, parity, stop bit, and data bit
Idle timeout period, number of lines displayed in a terminal screen, number of
characters in each line displayed in a terminal screen,and the size of history command
buffer
User priority
User authentication method, user name, and password
NOTE
All the configuration items of the switch, excluding the user name and password, have default values and
do not need to be configured additionally.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
60