5
O
PERATION
5.1 A
UTOMATIC DISPENSING SPEED ADJUSTMENT
Example: Entering the values
5.1.6
for the recommended rotary
encoder
Setting resolution:
MACHINE SETUP > Encoder Resol.
Set
Turn".
Setting measuring wheel diameter:
MACHINE SETUP > Encoder Diameter
Set
Switching on speed adaption:
Set
MACHINE SETUP > Speed Adaption
5.1.7
After the function
been called the following is displayed:
Encoder Diameter
to "500 Pulses/
x.x
x.x = diameter of measuring wheel
yy.y = belt speed according to current measurement
to "63.7 mm".
var = indicates variable belt speed
If the actual belt speed is known, the measured speed
to "On".
can be synchronised with it as follows:
Increase or decrease the diameter of the measuring
wheel until the belt speed displayed matches the ac-
tual speed.
78
Calibrating the belt speed
MACHINEN SETUP > Encoder Diameter
yy.y var
ALS
20X
256
has