Notes On Installation And Repair Work - Avery Dennison ALS 204 Service And Installation Manual

1 P
LEASE OBSERVE THE FOLLOWING
1.1 G
ENERAL INFORMATION

Notes on installation and repair work

1.1.3
General information
Before performing any maintenance or repair work:
Block access to the working area of the machine to

unauthorised persons.
Post a notification sign, which calls attention to the

work.
Electro-static discharge:
When the casing is open, protect the electronics

from damage due to electro-static discharge, e.g.
wear an anti-static arm band.
Tools:
Only use suitable tools.

Ensure all tools are at hand before beginning the

work.
Do not attempt to improvise or to use improper tools,

e.g. loosening an interior-toothed screw (Torx) with
a hexagon socket driver.
Rubber and plastic parts:
Do not allow hoses, seals, and other rubber or plas-

tic parts to come into contact with grease, petrol,
benzene, kerosene or mineral oil.
Environmental protection
Avoid unnecessary waste, e.g. use cleaning cloths

sparingly and reuse packing material.
Only store operating materials, such as fresh or

used cleaning agents, in suitable containers. Never
allow them to enter the sewerage system or to seep
into the ground.
Do not put old batteries, removed parts, and used

cleaning agents in household waste. Dispose of
them in an eco-friendly manner.
Packaging materials:
– Only recyclable materials are used for packaging
the machine.
Dispose of unwanted packaging material in an

eco-friendly manner.
Eco-friendly disposal:
Sort the waste as much as possible, e.g. separate

metals from plastics.
Avoid contaminating the waste if possible.

Drop off the waste at the collection points provided

for that purpose
or
Have the waste collected by suitable recycling

agencies.
Use any on-site options.

Observe all relevant rules, ordinances, and laws.

8
ALS
20X
256