Avery Dennison ALS 204 Service And Installation Manual page 85

5 O
PERATION
5.2 T O
ANDEM
Settings in the functions menu -
syncronisation via Ethernet interface
Table [90] contains example addresses for a di-
rect connection (peer-to-peer) of the machines.
For connection to a network, the addresses
have to be provided by the network administra-
tor. It is recommended to connect both machines to the
same subnet which should have low network traffic.
Settings on: Menu >Submenu
INTERFACE PARA
Master and Slave
>EASYPLUGINTERPR
>
MACHINE SETUP >
MACHINE SETUP >
Master
INTERFACE PARA
>NETWORK PARAM. >
MACHINE SETUP >
Slave
INTERFACE PARA
>NETWORK PARAM. >
[90] Required settings for master and slave for tandem synchroni-
sation via Ethernet interface.
PERATION
Function
Interface
Tandem synchron.
Tandem Operation
Tandem Distance
Slave IP address
IP Addressassign
IP address
Tandem Operation
IP address
Setting
„TCP/IP SOCKET"
„UDP Tandem Port"
„Master" or „FlipFlop master"
Set the distance [91A] between the dispensing edg-
es of the master and slave.
127.000.000.001
„Fixed IP address"
127.000.000.002
„Slave"
127.000.000.001
[91]] Distance (A) between the dispensing edges of the two
labellers
85
ALS
20X
256
A