Table of Contents
Advertisement
03/10 Rev. 5.05-00
SPECIAL FUNCTION
AP5
AP7
User defined
Standard
~
#
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
Printer type
AP 5.4
AP 5.6
Only in production mode.
Selection of the machine type. Must be set after the CPU board was replaced
or after new firmware was loaded.
CAUTION! - Selecting an inappropriate machine type can lead to
malfunctions or damage!
AP 5.6
AP 7.t
Default Values
AP 5.4
AP 5.6
Parameter appears only in production mode.
The presently selected settings of all parameters will be taken as default val-
ues. That is you will get those settings back even after a firmware update. All
you have to do is to call the parameter "Factory settings".
Calling the parameter "Factory settings" will set all parameters to the factory
preset values.
Command sequence
AP 5.4
AP 5.6
Parameter appears only in production mode.
„~" is used as start sign for Easy-Plug command sequences.
(Default setting) „#" is used as start sign for Easy-Plug command sequences.
Delete job
AP 5.4
AP 5.6
Press the Online-key to cancel the active print job.
Delete Job
Clearing . . .
Info-Printouts & Parameters
84
Advertisement
Table of Contents
