Avery Dennison ALS 204 Service And Installation Manual page 58

4.1 F
UNCTION MENU
4.1 F
UNCTION MENU
(continued)
SIGNAL INTERFACE
Interface mode >AI BOARD SIGNAL
9
>PLC SIGNALS Applicator type
End dispense mod Apply mode
Disp. end delay Start mode
End pulse width Dwell time
Blow on time
10
>APPLIC. SIGNALS Restart delay
Applicator type Position timeout
Status outputs Apply comp. time
Apply mode
11
Dwell time >AI BOARD SIGNAL
12
Blow on time Status signals
Restart delay
13
Position timeout >ACTIVE INPUTS
Apply comp. time Start signal
Inhibit signal
OD sensor signal
9) Only appears, if Interface mode = „PLC signals"
10) Only appears, if Interface mode = -"Applic. signals"
11) Only appears if applicator type = PEP, „PEP Blow on", „Reverse PEP", BTS or
„LA-TO timed"
12) Does not appear if applicator type = „LTP-LTPV", PEP, „Direct Dispense" or LA-TO
13) Does not appear if applicator type = ASA, „Direct Dispense" or LA-BO
14) Only appears with AI board installed and if Interface mode = „Applic. signals"
15) Only appears with AI board installed and if Interface mode = „PLC signals"
16) Only appears with AI board installed
17) Only appears if remote display is connected
18) Only with plugged-in CF-card
19) Only with ALS 256
[74] Overview of functions in the functions menu – part 2 (grey shading = only appears in production mode).
SERVICE/DIAGNOS.
14
Service
Serv. data reset
Sensor Test
Memory card test
11
Test functions
12
Store diagnosis
Data blocks del.
13 19
PS registers
15
58
(continued)
SERVICE DATA
>MODULE FW VERS. Manufacturer
System version Work place
System revision Company name
System date
Bootloader >DISPLAY DATA
uMon Display Version
16
Applicator int. Display serialNr
Remote disp.vers
>OPERATION DATA Remote disp. ##
Service operations
Tot. mat. length >CF CARD SLOT
Dispencing cycl. Card in slot
Operation time
>MEMORY DATA
>POWERSUPPLYDATA
Ram memory size
Type Flash mem size
Version CompactFlash
Serial number Default values
PS Temperature
Standby+On time
>CPU BOARD DATA
CPU identifier
PCB Revision
FPGA version
MAC Address
Serial number
Production date
PCB part number
Board part numb.
ALS
20X
256
17
17
18