Avery Dennison ALS 204 Service And Installation Manual page 92

6 E
NHANCED
6.1 A
CCESS VIA A
Changing a setting in the labeller menu
Click on the names of submenus and functions to open
them so that you can change the settings they contain.
Example: Making a change to
Click on "Parameter" link [95C].

Click on "LABEL SETUP" link.

Click on "Start offset" link.

A dialog box opens: [96].

Enter the required value in the entry field.

Click on the "Save" button.

The value is now transferred to the labeller.
[96] Example: Dialog box for entering value for the function
L
LABE SETUP > Start offset
Some functions trigger a reset of the labeller, if
they have been changed on the labeller via the
operator panel. However, if any of these func-
tions is changed via the web server, the reset
does not occur automatically. The changes
only come into effect after the next time the la-
beller is reset. In these cases, the "Reset" but-
ton [97A] appears after the setting has been
changed.
[97] Information (A): Changes made to the function setting do not
come into effect until after a reset.
F
UNCTIONS
W /FTP
EB
LABEL SETUP > Start offset
A
SERVER
:
92
ALS
20X
256