Signal Interface; General Notes; Circuit Diagrams For Signal Inputs - Avery Dennison ALS 204 Service And Installation Manual

7 E
LECTRONICS
7.5 S I
IGNAL NTERFACE
7.5

SIGNAL INTERFACE

General notes

7.5.1
The signal interface is in series a D-Sub15 (fem.) con-
nector [145A]. The machine can additionally (optional-
ly) be equipped with separate M12 sockets for inputs
and outputs [146][147].
The signal interface can be used as interface for appli-
cator signals or for PLC signals. The selection of the
interface type is done via the function menu:
– PLC signals:
SIGNAL INTERFACE > Interface mode
– Applicator signals:
SIGNAL INTERFACE > Interface mode
Recommended connector:
– Avery article no.: A8144 (male), A8145
(fem.)
– Manufacturer : Franz Binder GmbH
– Order no. : 713 1 99 1487 812 08
See www.binder-connector.de
Circuit diagrams for signal
7.5.2
inputs
+24 V
PLC_IN_A
PLC_IN_K
Ground
[148] Main circuit for signal inputs (NPN)
+24 V
PLC_IN_A
PLC_IN_K
Ground
[149] Main circuit for signal inputs (PNP)
D
ESCRIPTION
= „PLC signals".
= „Applic. signals".
NPN
Sensor
PNP
Sensor
141
[145] Position of the signal interface (A)
[146] Position of the M12 sockets.
A
PLC-OUT
START
ROTARY
ENCODER
LABEL
[147] Arrangement of the optional M12 sockets:
A Outputs
B Inputs
ALS
20X
256
A
B
PLC-IN
OD
CAP