Avery Dennison ALS 204 Service And Installation Manual page 30

3 I
NSTALLATION AND DEINSTALLATION
3.1 U
NPACKING
For machines held from the rear side
– Order number for fixing bolt assembly [17A] (includ-
ing screw and cylinder pins): A7621
Tools:
– 17 mm hexagon socket driver
– 8 and 10 mm hexagon socket drivers
Locate the two cylinder pins [17B] in the holes in the

fixing bolt [17A].
Screw the fixing bolt [18B] onto the flange on the

rear side of the machine with the screw provided
[18C].
– The two cylinder pins must locate into the holes
[18A] in the flange.
– Mount the fixing bolt with its bevelled side pointing
inwards towards the machine.
Tightening torque:350 Nm
,
ASSEMBLING AND CONNECTING THE MACHINE
A
[17] Fixing bolt (A) for clamping the machine from the rear side.
The cylinder pins (B) prevent rotation of the fixing bolt.
A
C
[18] Mounting the fixing bolt (B).
30
ALS
20X
256
B
B