Opening The Casing; Removing The Dust/Splash Guard - Avery Dennison ALS 204 Service And Installation Manual

9 R
EPAIR
9.3 O
PENING THE CASING
9.3

OPENING THE CASING

Removing the dust/splash
9.3.1
guard
At ALS 20X machines, which are equipped with the
IP65 option, the connection cover boxes [207A, B] must
be removed before opening the housing.
Prerequisites:
– The machine is de-energised.
Tools:
– Hexagon socket driver SW 2.5 and 3
Unscrew four screws [207A arrows].

Remove the cover box[207A] off carefully.

– By doing so, the power connector on the inside of
the cover box is removed.
If the cover box for interfaces [207B] is prevailing:
If prevailing: Pull the Ethernet connector off from the

cover box.
Unscrew four screws [207B arrows].

Remove the cover box [207B] carefully. While doing

so, unplug the interface cables from the machine.
A
[207] Housing with IP65 equipment (IT2).
A Cover box for power supply connection
B Interface cover box
186
ALS
20X
256
B