Avery Dennison ALS 204 Service And Installation Manual page 199

9 R
EPAIR
9.4 U
NWIND UNIT
Installing dancer arm
Fit bushing [243B] into casing.

Clean the shaft's internal thread [244A] and the cor-

responding screw M10X25 (of threadlock).
Introduce dancer arm into casing. Ensure that the

pin [245B] on the front side of the casing mates with
the hole [245A] in the lever plate.
– Machine with IP65 option: check the seal between
dancer arm and housing for damages and replace it,
if necessary.
Connect plug connection [243A] for unwind unit

sensor.
A
B
[243] Fitting bushing, connecting plug connector
[244] Cleaning the shaft's internal thread.
A
[245] Pin must mate with hole
199
ALS
20X
256
A
B