Lubrication; Rotary Knife Assembly - Avery Dennison SNAP 500 User Manual

User's Manual—SNAP™ 500 Printer

5.3 Lubrication

5.4 Rotary Knife Assembly

All manuals and user guides at all-guides.com
WARNING: If the cables are not connected correctly, the
print head will be destroyed when the power to the printer
is turned on. Check to see that the cable is tight by
observing from underneath the print head. The cable's
connectors should be inside of the connectors located on
the print head.
8. Replace the tape and ink supplies, and double-check your work.
9. Turn on the power to the printer.
10. As a final test, make a test run to check the print quality of the labels.
The AVERY DENNISON SNAP 500 printer is manufactured with ball bearings
that do not require lubrication and there are two (2) oil-impregnated bronze
bushings in the Nip Roller assembly that do require lubrication.
Caution: AVERY DENNISON recommends lubricating the
bronze bushings with one drop of multi-use oil once every
month during normal operation.
The rotary knife assembly for the AVERY DENNISON SNAP 500 printer sets
into a groove in the mounting bracket and is locked in place with a single screw.
It has been designed to deliver an average of two million cuts if used with woven
tapes and four million cuts when used with coated tapes, provided no foreign
objects are inserted into the assembly that could damage the knife blades.
No maintenance is required for the knife assembly. There are no field
replacement components. When the blades become dull, replace the rotary knife
assembly. Replacement knife assemblies are sold ready to install with no
adjustments required.
51