Avery Dennison ALS 204 Service And Installation Manual page 34

3 I
NSTALLATION AND DEINSTALLATION
3.1 U
NPACKING
V-shaped dispensing edge
Tool:
– 8 mm hexagon socket driver
Mount V-shaped dispensing edge as shown

– The angle of the V-shaped dispensing edge cannot
be changed. It is mounted without fixing pins.
Adjustable dispensing edge holder
Tool:
– 8 mm hexagon socket driver
The standard dispensing edge holder can be replaced
by the optional adjustable dispensing edge holder [28],
which enables a height adjustment of the dispensing
edge.
– Adjustment range: 70 mm in steps of 0.2 mm [30]
– Mounting is possible in different angles in steps of
15°, as with the standard dispensing edge holder
– Article no.: RH A8018, LH A8138
Adjusting:
Rotate the adjustment wheel [28A], until the inten-

ded height is reached.
[30] Adjustment range of the adjustable dispensing edge holder.
,
ASSEMBLING AND CONNECTING THE MACHINE
[27] V-shaped dispensing edge in place.
A
[28] Adjustable dispensing edge holder.
A Adjustment wheel
B Spindle
[29] Adjustable dispensing edge holder in place.
34
ALS
20X
256
B