Forced Bootloader Start - Avery Dennison ALS 204 Service And Installation Manual

6 E
NHANCED
6.5 F
ORCED BOOTLOADER START
6.5

FORCED BOOTLOADER START

A forced bootloader start is required, if the dispenser
firmware hung up and the machine will not get ready for
operation even after a restart.
Switch the machine off.

Keep the buttons

neously switch on the machine.
The bootloader appears:
Boot Loader V x.x
115KB, 8N1
Avery Dennison
Dispenser-CPU32
x.x = Bootloader version
Press the button.

The menu LOADER FUNCTIONS with the single
function „Clear Params" shows up:
LOADER FUNCTIONS
Clear params
Avery Dennison
Dispenser-CPU32
Press the button.

Clear params
no
Avery Dennison
Dispenser-CPU32
Press the button to change to „yes".

Press the button.

All settings in the functions menu are deleted, inclu-
ding the setting which caused the firmware to crash.
Switch the machine off.

Switch the machine on while keeping the buttons

+ pressed, until the machine type is dis-
played.
F
UNCTIONS
+ pressed and sumulta-
After this display:

Code:
press the following buttons in succession:
, , ,
Set the machine type under

Dispenser type .
Switch the machine off and on again after waiting at

least 10 s in between.
111
, 3x .
MACHINE SETUP >
ALS
20X
256